4MP IR PTZ Network Camera
4MP IR PTZ Network Camera is a new generation of cameras combined with traditional camera and network technology.
It can transmit images to the other end of the globe through the network, and remote browsers do not need any professional software, as long as the standard network browser can monitor its image.
4MP IR PTZ Network Camera is a new generation of cameras combined with traditional camera and network technology. It can transmit images to the other end of the globe through the network, and remote browsers do not need any professional software, as long as the standard network browser can monitor its image.
4MP IR PTZ Network Camera can not only be used for regional monitoring based on computer LAN, such as residential community monitoring, office buildings, banks, shopping malls, etc.; and 4MP IR PTZ Network Camera can also be used for new type of cross-region remote monitoring and network Online display, remote children and elderly care, unattended communication room monitoring, online broadcast of tourist attractions, product online exhibitions, etc.
2592(H) x 1520(V), 4 Megapixels
Electronic Shutter Speed
Color: 0.05Lux@F1.6; 0Lux@F1.6 (IR on)
More than 50dB
Distance up to 100m (328ft)
IR On/Off Control
F1.6 ~ F4.4
Angle of View
H: 58.2° ~ 4.8°
Close Focus Distance
Pan: 0° ~ 360° endless; Tilt: -15° ~90°,auto flip 180°
Manual Control Speed
Pan: 0.1° ~200° /s; Tilt: 0.1° ~120°/s
Pan: 240° /s; Tilt: 200° /s
5 Pattern, 8 Tour, Auto Pan ,Auto Scan
Human-oriented focal Length/ speedadaptation
Power up Action
Auto restore to previous PTZ and lensstatus after power failure
Activate Preset/ Scan/ Tour/ Patternif there is no command in the specified period
Tripwire, Intrusion,Abandoned/Missing,Face Detection
Main stream: 4M/3M/1080P/1.3M/720P(1~25/30fps)
Sub stream1: D1/CIF(1 ~ 25/30fps)
Sub stream2: 720P/D1/CIF (1~25/30fps)
Bit Rate Control
H.265/H.264: 448K ~ 8192Kbps
Auto(ICR) / Color / B/W
BLC / HLC / WDR(120dB)
Auto, ATW, Indoor, Outdoor, Manual
Auto / Manual
Up to 24 areas
Network cameras generally consist of lenses, images, sound sensors, A/D converters, controller network servers, external alarms, and control interfaces.
As the front-end part of the network camera, the lens has a fixed aperture, auto iris, auto zoom, auto zoom, and the like, which is the same as the analog camera.
The CCD image sensor is composed of a photodiode arranged in two dimensions on a single crystal silicon substrate and a transmission circuit thereof. Photodiodes convert light into electrical charge that is transmitted and output via a conversion circuit.
In general, devices that transmit good image quality use CCD image sensors, while products that focus on power consumption and cost choose CMOS image sensors. But new technologies are overcoming the inherent weaknesses of each type of body while retaining certain features that are appropriate for a particular application. This part is the same as the analog camera. The sound sensor is either a pickup or a microphone, just like the traditional microphone.
The function of the A/D converter is to convert analog signals such as images and sounds into digital signals. The image sensor module based on CMOS mode has an interface for direct digital signal output, and does not require an A/D converter; and the image sensor module based on CCD mode has an interface of direct digital output, and does not need an A/D converter, but due to this module Mainly for analog camera design, only analog output interface, so A/D conversion is required.